Furniture is to help injured coup

Daily life, furniture is often a result of a variety of accidents by emergency conditions, "injuries" such as cigarette butts burned to the desktop, or deformation of the doors. How can we help heal the success of the furniture? There are a variety of network repair tips, and they apply it? How to speak and listen to experts.

     1 yellow or white furniture, the old color significantly

     Network statement: The tooth powder (or toothpaste) to clean, can be changed.

     Expert advice: This is the paint, curing agent oxidation occurred, resulting in the "yellowing" phenomenon. Generally from the inside to the outside will turn yellow, white and light-colored furniture vulnerable to this situation. Although the tooth powder (or toothpaste) has a certain degree of decontamination capacity, its small wear-resistant particles can also erase the stain attached to the surface of furniture, but the yellowing has occurred without any role in the film, could only finish after grinding sandpaper.

     2 door deformation

     Network that: The door straight to the heavy pressure of a pressure change can have a very good.

     Expert advice: furniture plate deformation are mainly caused by the production of substandard quality, as well as Edge did not deal with the deformation, and deformation caused by moisture expansion. Deformation of solid wood furniture, wood moisture content is too high, after evaporation, resulting in uneven contraction of wood; spray painting inside and outside when the uneven surface, coating different result in the difference between water absorption and can lead to deformation.

     If it is material to their own reasons, can only deal with factory back door removed or replaced. If it is uneven spray, you need to re-spray to deal with. Heavy pressure with a pressure is only an expedient measure, a temporary solution, easily repeated.

     3 decorative panels drum bag

     Network that: In dealing with can be the first with a sharp blade in the "bubble" in the direction of the central grain-shun knife cut. And then use a syringe to inject glue , pressing gently with your fingers "bubble" in the upper part of the glue will overflow with wet . Smooth bottom and use a packet size greater than the drum above the heavy pressure. After the pressure in order to prevent overflow and a small amount of glue stick around the surface of bad drum package can be in the "bubble" on the cover separated from the plastic film. In this way, decorative veneer on the formation.

     Expert advice: drum package is not affixed to a good lead finishes. The "Cold Curing" the basic place to deal with. However, after the formation of surface decoration, the surface of a slight injury, the wound should be given the color and spray varnish, or eyesores created.

     Edge Article 4 held

     Network that: The high-temperature hot-melt iron, plastic doors and can be re-stuck.

     Expert advice: Edge Article Kaifeng quality is generally poor as a result of gum, uneven or missing plastic coating, James Edge article failed back, can not be a good bonding glue caused. Edge of furniture, such as using a high temperature hot melt adhesive, the above-mentioned methods can be used. However, the need for proficiency in the skills, or other finishes, easy to burn. It would be back to plant for disposal.

     5 surface abrasion

     Network: The furniture can be used the same color crayon or paint, applied in the furniture of the wound to cover exposed background, and then polish with a thin transparent layer to be coated.

     Expert advice: The above approach is only an expedient measure. Scratches the surface in terms of the "ditch", the repair should be dedicated reagent "land fill" fill Xiu-Ping and then color, then sprayed a layer of varnish. Plate furniture scratches, can be used with the melamine board is similar to repair of a crayon color, and then sprayed with a layer of varnish. Nail polish hardness enough, does not recommend the use of.

     6 burn marks or burn white printed

     Network view: cigarette butts, ashes or burning out of the matches were sometimes left in the furniture finishing. If only finish burning, you can pack a layer of fine lines toothpicks on hardware cloth, gently traces liberally and re-apply, and then coated with a thin layer of wax can be removed . If burning wood under the paint, the law could do nothing about it.

     Inadvertently placed on the cup of hot water on wood furniture, the paint surface will be white hot lap marks may be coated in Vaseline oil, and two days later, gently wipe with a soft skin, hot to remove the marks.

     Expert advice: The two methods are ineffective. To deal with burn marks can only undermine the burnt parts, and then use the "fill soil" fill inlay, wood repair, painting color processing. If you have a scalded white furniture finish and India to illustrate the performance of dry-heat-resistant paint failure is due to chemicals in the paint by the paint film after high temperature reaction occurred to generate water vapor, resulting in the look. The use of the above would like to use Vaseline petroleum jelly is probably the absorption of moisture, but this does not work. Expedient to use Xiu Xiu reagent and then spray to deal with. If you want to solve all but wiped out the film, re-use dry-heat-resistant paint finish qualified.