Maintenance of Furniture for the plate include the following aspects:
First of all, placing Furniture on the ground plate must be kept flat, the four legs balanced landing. If, after placement of Furniture, is often unstable sway swing state, run-off would inevitably assembled or fasteners, bonding part of the crack, thus affecting the effectiveness and reduce the use of Furniture life. In addition, if the soft ground to make Furniture, uneven, not to use wood or iron sheet pad Furniture legs, so that even if the balance, it is difficult to force uniform, long-term damage to Furniture will go on the internal structure. The only way is to repair the ground of compensation, or an area slightly larger than the hard rubber plate shop in the south to make Furniture, four legs, a smooth landing.
Panel Furniture
Click here to see all news photos
Second, when the dust cleared Furniture is best to use pure cotton knitted fabric, and then spend the valuables wool brush clearance depression or relief decoration in the dust. After paint handling of Furniture, avoid using gasoline or cleaning solvents can be used colorless wax Furniture polish wipe to enhance the luster to reduce dust.
Third, the location of Furniture placed in direct sunlight is best not to be frequently exposed to the sun will fade Furniture, paint film, the metal parts easily oxidized metamorphic, wood easy hair brittle. Summer is best to use curtains cover the sun, to protect the Furniture.
The last thing is to keep indoor humidity, and do not let Furniture wet. In the spring and the use of humidifiers should be limited to time, to prevent too large a result of moisture damage Furniture, such as rotten wood, metal pieces of rust, easy to open plastic bonded parts from the other. Cleaning Furniture usually as little as possible of water, the more necessary to avoid using alkaline, only the net water suitably twisted wipe a damp cloth, then wipe clean with a dry cloth.
As long as the above points, your Furniture, home plate will not be so easily distorted.