How to have six quality furniture clearance?

May 9, 2008, Shunde District Foshan City, Guangdong Province furniture products quality supervision and inspection of the regular analysis of the township government will be held in the town. At the meeting, published in 2008 Shunde furniture regular Supervision, Inspection and statistical results showed that sampling of Shunde District 588 batches of products, a pass rate of 78.40%. Sofa, chair, soft mattress springs, wooden cabinets, dining table dining chair, wood furniture products 6 through customs inspection? National furniture Quality Supervision and Inspection Center, a lecturer at the analysis of Liao Fu-6 lists the type of product testing and standards and a positive quality control for the enterprise passed the "ideas."

A sofa-type (test based on the standard: QB / T 1952.1-2003)

Test items: carpentry requirements, product signs, pieces of material to be used as the internal wooden, metal pieces require the use of materials, foam request

Standards require that: 1) internal wooden pieces should be dealt with by cutting the crude light; 2) the product or logo should be to provide: the producer of Chinese name, address and communication information, factory certified inspection, furniture Manual; 3) internal material should not be used: the timber insects are being eroded, slightly decadent timber area covering more than 15% of parts and components; decadent thick sheet of more than 25 percent wood; by force of natural wood parts Prodenia than 20%; there was a slight crack or section Son of the impact of structural strength of wood; with wood bark; 4) the apparent use of materials for metal parts (volume) Block density surface ≥ 25kg/m3, other parts of ≥ 20kg/m3; 5) the performance of A-class foam rebound ≥ 20kg /; B level ≥ 40%; C level ≥ 15% 5) compression permanent deformation A level ≥ 5.0%; B level ≥ 7.0%; C level ≥ 10.0%.

Failed to improve the method: internal wooden case, if the bark, such as a blunt edge, a cut must be processed before use; in accordance with the standard requirement to provide identification and description; selection of the wood without bark; or with Planing the wood bark good; to ensure that the force components of the wall thickness should be not less than 1.2mm; selection of density, performance standards of resilience foam, sponge.

Second, swivel chair (based on standard tests: QB/T2280-1996)

Test item: the use of signs and that require the use of materials

Standards require that: 1) the factory should be finished factory signs, Make, site of the plant; finished assembly should have the use of the factory manuals, content should be clear, easy-to-read. Model should be marked, the standard number, chapter tests and the factory (manufacturing) date; 2) the use of materials for flexible polyurethane foam base density ≥ 25kg/m3 tensile strength ≥ 85kPa; other parts of the soft polyurethane foam density ≥ 22kg / m3

Failed to improve the method: in accordance with the requirements for use with signs and the use of standard soft-density polyurethane foam density.

Third, the soft spring mattress (based on standard tests: QB/T1952.2-2004)

Test items: the foam composite material density; health requirements (bedding material); spring requirements; sewing requirements; mattress of formaldehyde emission; product signs, the use of composite materials on the foam density

Standards require that: 1) the foam composite material density ≥ 15kg/m3; 2) should not be a mixture of plastic textile materials, plant straw or leaves, shells,竹丝, wood shavings, sand, stone, metal and other debris; 3) There should be no rust spring requirements, corrosion phenomena; 4) should not be disconnected; should not jump more than 3 needles and; 5) of the formaldehyde emission mattress ≤ 0.050% mg/m2-h; 6) products should have the product signs should include the following: a) the product name, model specifications; b) the implementation of the standard code; c) certification testing, production date; d) the name and address of the Chinese producers, the product should be made available for use, in line with the main content GB5296 .6-2004 provisions, which should include at least: a) the product name, model specifications, number and level of implementation of standards; b) the main raw and auxiliary materials (such as fabrics, bedding materials, springs, etc.) the name, character, grading; C ) The main technical performance (such as spring coverage, durability, compression, etc.) parameters; d) the control of health and safety (for example, is expected to pave the way for Health, mattresses formaldehyde emission, such as engaging in cigarette ignition performance) indicators; e) products method, attention.

Failed to improve the methods: the selection of qualified composite fabric on foam; in accordance with the standard requirements of the textile material should not be a mixture of plastic and plant straw or leaves, shells,竹丝, wood shavings, sand, stone, metal and other debris, rust are not allowed in the spring mattress, the selection of qualified sponge, adhesive, in accordance with the standard requirements to provide a full range of signs and use

Fourth, wooden cabinet (based on standard tests: QB/T2530-2001)

Test items: formaldehyde emission; carpentry requirements; drawer slide strength; the activities of parts of the vertical load stability; product logo

Standards require that: 1) formaldehyde emission ≤ 1.5mg / L; 2) wood-based panel made from parts and components, exposed edge Edge should be dealt with, there should be no collapse surface stubble, marks, traces of sand; 3) Wood-based Panel force 350N, 10 times, moving parts should not be a serious and permanent loose-shaped 4) non-150N overturning capacity drawer 5) the product or label, the packaging should be: (1) product name, specifications, address, registered trademarks (3 ) product standards and certification number

Failed to improve the method: selection of qualified man-made board, adhesives; based panels made from parts and components, exposed edge Edge unused material or paint is sealed, the outer surface of the product should be processed well, can not have an acute angle, burr, marks and so on; improve the product design structure, such as the enhanced structural rigidity of the main products and the strength, the use of strengthening the board and the backplane side to switch to some of the material density, or thickening; in accordance with product labeling standards; the use of good quality drawer slide.

V. Chair table (based on standard tests: QB/T2383-1998)

Test items: formaldehyde emission; moisture; product logo

Standards require that: 1) formaldehyde emission ≤ 1.5mg / L; 2) heat resistance of not less than two (that is, to reach 2 or 1); 3) logo or product packaging should include at least: a) product name, specifications model; b) the Chinese name of the production factory, or registered trademarks of the site; c) Code certification and standards

Failed to improve the methods: the use of environmentally friendly man-made board, adhesives, wood-based panel should be exposed Edge, improve processes, reduce the formaldehyde emission; to use good quality paint, improved formulations, process; in accordance with the standard requirements with product identification

VI, wood furniture (as a test of the standard: QB/T1951.1-1994)

Test items: formaldehyde emission; product logo

Standards require that: 1) formaldehyde emission ≤ 1.5mg / L; 2) products should be marked and lasting sexual plant

Failed to improve the methods: the use of environmentally friendly man-made board, adhesives, wood-based panel should be exposed Edge, improve processes, reduce the formaldehyde emission; in accordance with the standard requirements of factory is equipped with a durable standard.